SEDANA, with offices located in Sharjah, Dubai, Abu Dhabi, Fujairah, Hamriyah, and Beirut, not only provides our clients with the
leading brands of automotive lifts but also ensures that our after sales service exceeds their expectations.
Our range includes the following:
■ 1 post and 2 posts lifts for the universal working place
■ Asymmetric and symmetric lifting arms for safe lifting of wide vehicles
■ Top connection between the columns with no obstacles through the floor
■ Available versions: electromechanical with screws (spindle) or hydraulic with two hanging cylinders
SMART Lift - electromechanical versions with screws (spindle)
■ 1 post lift with lifting capacity 2,000 kg
■ 2 posts lifts with lifting capacity from 3,000 kg to 5,000 kg
■ T-version: 2 posts lift wit special asymmetric carrying arms for small commercial vans. The short arm are 3-times telescopic until 2.44 m range
■ DC-BMW-version: Mercedes-Benz-lifting arms. Short arms are 3-times telescopic extra short, ideal for wide passenger cars
(i.e. MB, DC, BMW)
■ MM-version: carrying arms are supplied with integrated height adapter 'Mini-Max' from 85-190 mm
Power Lift - hydraulic versions
■ 2 posts lifts 'Power Lift' with lifting capacity from 4,000 kg to 6,500 kg
■ DC-version: Mercedes-Benz-lifting arms. Short arms are 3-times telescopic extra short, ideal for wide passenger cars (i.e. MB, DC, BMW)
■ Universal-version: universal lift to pick up a wide range of vehicles from the smallest cars (e.g. Smart) to big commercial vans
(eg. MB Sprinter/VW LT 2 - long version)
SEDANA, with offices located in Sharjah, Dubai, Abu Dhabi, Fujairah, Hamriyah, and Beirut, not only provides our clients with the
leading brands of automotive lifts but also ensures that our after sales service exceeds their expectations.
Our range includes the following:
■ 4 posts lifts with lifting capacity from 3,200 kg to 30,000 kg
■ Plus-version: with wheel-free lift
■ Wheel alignment-version: wheel alignment set with rear sliding plates and front recesses for turntables, at one level with wheel-free lift
■ True Wheel free-version: with special beam system for 4 WD cars with air suspension
■ 4 posts lifts with modern design, clean columns. Space saving design and low drive-on
height
■ Adjustable locking bars in each column for accurate wheel alignment positions
■ High performance lift with oil-submerged power unit that guarantees a quite operation
■ Mid-rise lifts - the mobile solution for the specialized repair workshop, especially for tire,
brake and body shop services
■ With hydraulic operated safety lock
■ Control unit with controllable lifting and lowering speed, no compressed air required
■ 1 meter stroke in a record lifting time of 9 sec.
■ Hydraulic scissors lift - space-saving design, without connection between the scissors
■ Compact construction and low drive-on height for an easy access
■ Ideal for low clearance cars
■ Accurate and reliable hydraulic synchronization through the master-slave-system. Available with flat runways,
with wheel alignment set and/or wheel-free lift
Scissors lift with capacity from 3,500 kg to 40,000 kg - NT-version: new safety standard technology. Fully hydraulic with two (master-slave) independent hydraulic circuits - CLT-version: Computerized Leveling Technology - guarantees ultimate safety at any height and perfect synchronization between the runways - Plus-version: with adjustable wheel-free lift mounted on runways - Wheel Alignment Set: with integrated rear sliding plates and front recesses for turntables
■ Hydraulic double-scissors lifts; economically an attractive solution - ideal where space is restricted or in a
traffic area
■ Fully hydraulically controlled - no air supply necessary - Smooth starting, braking and programmable
stopping position; with fast lifting and lowering speed control
■ Accessibility to the car from all sides
■ Available versions for in-ground installation or with a very low drive-on height (98 mm) for installation above
ground. Several synchronization systems are also available.
■ In-ground lift for the sophisticated sales and service organization
■ Within our wide range of in-ground lifts, we have the perfect solution for every application
■ Without columns, free access to the vehicle from every side with minimum space requirements
■ Available with 1-, 2- or 4-pistons; with carrying arms, lifting platforms or long runways
■ Fully hydraulic motorcycle scissors lift- With two separated hydraulic circuits, protected by mechanical valves
■ Smooth lifting by push button and lowering by control panel
■ Compact hydraulic unit with oil-submerged motor (silent operation)
■ Hinged ramps - Adjustable wheel clamp
■ This is another type of bike lift
■ Motorcycle scissors lift- With two separated hydraulic circuits, protected by mechanical valves and Fully Hydraulic
■ Smooth lifting by push button and lowering by control panel
■ Hinged ramps - Adjustable wheel clamp
■ Modular scissors-lift for heavy duty vehicles- Lifting capacity from 15.000 kg to 40.000 kg - Lifting movement only in vertical direction
■ Capacity and length are resulting from different possible combinations of scissors elements and/ or connecting modules - Connecting modules can be unlocked (hydraulic option) and left on the floor level to increase free space under the vehicle and between the
scissors modules
■ Scissors modules can be separately driven for smaller capacities or shorter vehicles
■ Perfect electronic synchronization between platforms by mean of stroke measuring sensors - Automatically operated mechanical
locking system
■ 1 post lift with lifting capacity 2,000 kg
■ 2 posts lifts with lifting capacity from 3,000 kg to 5,000 kg
■ T-version: 2 posts lift wit special asymmetric carrying arms for small commercial vans. The short arm are 3-times telescopic
until 2.44 m range
■ DC-BMW-version: Mercedes-Benz-lifting arms. Short arms are 3-times telescopic extra short, ideal for wide passenger cars
(i.e. MB, DC, BMW)
■ MM-version: carrying arms are supplied with integrated height adapter 'Mini-Max' from 85-190 mm
GH/GHL,GHS/GHSL,GHUS/GHUSL, GHSP/GHSLP,GHUSP/GHUSLP
■ Capacity 4,000-30,000 kg
■ Stroke 600-800 mm
■ Peg-diameter 55 & 80 mm
SERIES TWINRAM JACK
TwinRam Jack 15
■ Air connector 10 bar
■ Weight 190 kg
■ Capacity 2 x 7500 kg
■ Stroke 400 mm
■ Peg-diameter 35 mm
SERIES PIT STAR MOBILE
Pit Star Mobile 14/14
■ Capacity 4,000-30,000 kg
■ Stroke 600-800 mm
■ Peg-diameter 55 & 80 mm
SERIES MASTER GEAR
Master Gear 2.0
■ E-Motor 1.1 kW
■ Power supply 400 V/ 50 Hz
■ Weight 550 kg
■ Capacity 2,000 kg
■ Max. Height 1730 mm
■ Min. Height 730 mm
■ Stroke 1000 mm
■ Set-up width/length 800/1700 mm
SERIES MASTER JACK
Master Jack 4.0
■ Operating pressure 200 bar
■ Air connector 9 bar
■ Weight 179 kg
■ Capacity 4,000 kg
■ Max. Height 2010 mm
■ Min. Height 910 mm
■ Stroke 1100 mm
■ Set-up width/length 885/800 mm
■ Peg-diameter 35 mm
