UHE 28 PLUS (MULTI-HAMMER)
Hammer chuck for tools with SDS-plus shank end, quick action keyless chuck for tools with cylindrical shank end, rubber-coated side handle, drilling depth guide, carry case.
BHE 20 COMPACT (ROTARY HAMMER)
The BHE 20 compact was developed on the basis of ergonomic principles. Ergonomic studies have shown that not only the proper posture is important but also the shape and weight of the tool used. Because of its high level of performance and low weight, you can work with it in places that would require considerable more effort with other hammers.
KHE 24 (COMBINATION HAMMER)
The KHE 24 is Suitable for bits and accessories with SDS Plus shank bit with the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact), Impact stop for drilling without impact, Rotation stop for chiseling, clockwise and anticlockwise rotation, Variospeed (V) electronics for variable speed change, Robust Metabo Marathon motor for extra long service life.
KHE 32 (COMBINATION HAMMER)
The KHE 32 is suitable for bits and accessories with SDS Plus shank bit with the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact). Impact stop for drilling without impact, Rotation stop for chiseling, clockwise and anticlockwise rotation, Metabo "Quick" chuck change, thereby quick change of hammer chuck for hammer drilling and chiseling and quick-action keyless chuck or geared chuck for drilling and fastening screws (accessory), Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load. Robust Metabo Marathon motor for extra long service life, pneumatic high-performance hammer mechanism.
KHE 56 (COMBINATION HAMMER)
The KHE 55 is suitable for bits and accessories with SDS-max shank bit with the appropriate accessories, it is also suitable for bits and accessories with spline shank bit or ratio thread, suitable for bits and accessories with spline shank bit and with 19 mm hexagonal and cylindrical end Ø 16.5 mm, Rotation stop for chiseling, Metabo CODE! system: electronic anti-theft system at the touch of a button. With the CODE available separate! Key locks the electronic tool and thus protects it against misuse and theft. Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load.
KHE 75 (COMBINATION HAMMER)
The KHE 75 is suitable for bits and accessories with SDS-max shank bit, with the appropriate accessories, it is also suitable for bits and accessories with spline shank bit or ratio thread, Rotation stop for chiseling, Metabo CODE! system: electronic anti-theft system at the touch of a button. With the CODE available separate! Key locks the electronic tool and thus protects it against misuse and theft. Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load. thumbwheel for preselection of speed, pneumatic high-performance hammer mechanism.
MHE 56 (CHIPPING HAMMER)
The MHE 65 is the specialist for finishing around windows and doors, smaller to medium breakthroughs and for chasing slots in ducts. It is in its element for many chiselling applications, from cleaning off plastering and tiling, to smoothing smaller "constructional faults" and flashings on brickwork and concrete.
MHE 96 (CHIPPING HAMMER)
The MHE 95 chisel hammer with anti-vibration mechanism is the problem-solver for all structural corrections, chiseling form works and all demolition tasks. Power according to weight and material. The impact energy can be set at seven positions.
SBE 561
Variospeed (V) electronics for infinitely variable speed change, thumb-wheel for pre-selection of speed, sturdy double-shell housing, long-life motor, clockwise and anticlockwise rotation, spindle with hexagon recess for screwdriver bits, lightweight design prevents fatigue, ergonomic housing design for ideal handling, rubber-coated handle: vibration-reduced, comfortable and safe.
SBE 660
Variospeed (V) electronics for variable speed change, thumb-wheel for pre-selection of speed, aluminum die cast gearbox housing for optimum heat dissipation and long life, optimal cooling by axial/radial fan, two-speed gear unit, powerful impact mechanism, robust Metabo Marathon motor for extra long service life, Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material.
SBE 750
Variospeed (V) electronics for variable speed change aluminum die cast gearbox housing for optimum heat dissipation and long life, robust Metabo Marathon motor for extra long service life, Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit, optimal cooling by axial/radial fan, two-speed gear unit, thumb-wheel for pre-selection of speed, powerful impact mechanism, jams or catches in the material, Metabo coil guard to protect the motor from abrasive influences, clockwise and anticlockwise rotation.
SBE 1010 PLUS
Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load. thumb-wheel for pre-selection of speed aluminum die cast gearbox housing for optimum heat dissipation and long life optimal cooling by axial/radial fan two-speed gear unit powerful impact mechanism robust Metabo Marathon motor for extra long service life Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material.
BE 4010
The BE 4010 is compact, lightweight machine in pot design for permanent use small, handy bench machine, ergonomic housing design with large trigger button, user-friendly guidance of machine exhaust in all working situations, Variospeed (V) electronics for variable speed change, long-life motor, clockwise and anticlockwise rotation, Metabo quick-action key less chuck Futuro Plus for quick tool change spindle with hexagon recess for screwdriver bits.
BE 561
The BE 560 is small, handy bench machine sturdy double-shell housing, ergonomic housing design with large trigger button, Variospeed (V) electronics for variable speed change, thumb-wheel for pre-selection of speed, long-life motor, clockwise and anticlockwise rotation, Metabo quick-action key less chuck Futuro Plus for quick tool change, spindle with hexagon recess for screwdriver bits, auto-stop carbon brushes to protect the motor.
B E 622 S- R+L
Aluminium die cast gearbox housing for optimum heat dissipation and long life, Variospeed (V) electronics for variable speed change, Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material, clockwise and anticlockwise rotation, robust Metabo geared chuck, spindle with hexagon recess for screwdriver bits, suitable for drilling with drill bits with large diameter (e.g. form drills) and for stirring thick liquid-like materials.
BE 1020
Aluminium die cast gearbox housing for optimum heat dissipation and long life optimal cooling by axial/radial fan, ergonomic housing design with large trigger button, Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load, thumb-wheel for pre-selection of speed, two-speed gear unit, robust Metabo Marathon motor for extra long service life, Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material, Metabo coil guard to protect the motor from abrasive influences, clockwise and anticlockwise rotation, robust Metabo geared chuck, spindle with hexagon recess for screwdriver bits, Overload protection by electronic monitoring of coil temperature. LED for impending overload, No-volt release switch: prevents unintentional machine start, long additional handle for work with high torque, auto-stop carbon brushes to protect the motor, Abschaltkohlebürsten mit Anzeige zum Schutz des Motors.
BDE 1100
Aluminium die cast gearbox housing for optimum heat dissipation and long life, Variospeed (V) electronics for variable speed change, two-speed gear unit, Metabo S-automatic torque limiting clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material, clockwise and anticlockwise rotation, robust Metabo geared chuck, suitable for drilling with drill bits with large diameter (e.g. form drills) and for stirring thick liquid-like materials, high torque, operation comfort and safety by ergonomically shaped handle, auto-stop carbon brushes to protect the motor.
WBE 700
Aluminium die cast gearbox housing for optimum heat dissipation and long life, Vario-Constamatic (VC) full-wave electronics for variable speed change. Under load the speed remains almost constant, thumb-wheel for pre-selection of speed, robust Metabo geared chuck, especially suitable for working in places difficult to reach, auto-stop carbon brushes to protect the motor.
RWE 1100
Ideal Stirring and mixing device for tough permanent use for plasting, painting and brickwork, Suitable for stirring thick viscous substances, Die cast aluminum gearbox housing, Operating comfort and safety by auxiliary handle.
B 7532/2
Aluminum die cast gearbox housing for optimum heat dissipation and long life, electrical speed changeover, two-speed gear unit, suitable for drilling with drill bits with large diameter (e.g. form drills), for stirring thick liquid-like materials and for screwing in long screws with large diameter (e.g. in frame and facade pegs), breast plate and side handle for increased axial pressure, auto-stop carbon brushes to protect the motor.
POWER MAXX (CORDLESS DRILL / SCREWDRIVER)
Variospeed (V) electronics for variable speed change, 20-level adjustable torque, plus drilling level, clockwise and anticlockwise rotation, quick stop for rapid fastening of screws, spindle with hexagon recess for screwdriver bits, pistol grip for optimum power transmission in direction of drilling, fatigue-free operation due to perfect ergonomy, sturdy die cast gearbox housing for long service life, easy and quick change of battery pack charger (charging time approx. 2 hours).
BSZ 12 (CORDLESS DRILL / SCREWDRIVER)
Variospeed (V) electronics for variable speed change, 20-level adjustable torque, plus drilling level, clockwise and anticlockwise rotation, quick stop for rapid fastening of screws, Quick-action keyless chuck and spindle stop gear for convenient one-hand tool change: Metabo "Quick", T-handle for optimum center of gravity compensation, especially for screws, fatigue-free operation due to perfect ergonomy, a vibration absorbing rubber-coated handle provides a comfortable non-slip grip for the user, high service life due to 3-level planetary gear with metal teeth, gentle, spring-supported gear change, built-in collector fan to prevent overheating, bit case for two bits, maximum system flexibility through free combination of chargers and battery packs (within a volt class), easy and quick change of battery pack, "AIR COOLED" battery packs can be charged up to 2000 times (with ACS 15: 3000-times) due to gentle charging process, The "AIR COOLED" quick charger AC 30 reduces the charging time of warm battery packs by up to 50%. Charging time approx. 30 minutes (at 1.4 Ah).
BSZ 12 (CORDLESS DRILL / SCREWDRIVER)
Selectable Impulse mode, variospeed (v) electronics, 20-level adjustable torque, plus drilling level, clockwise and anticlockwise rotation, quick stop, quick-action keyless chuck and spindle stop gear for convenient one-hand tool change: Metabo "Quick".
BSZ 18 IMPULSE (CORDLESS IMPACT DRILLS)
The Metabo BSZ 18 Cordless Drill/Driver is equipped with 20 torque settings, plus a drill setting with forward and reverse modes. It has a two-speed gearbox, a key-less 1/2-inch chuck, and an ergonomic, rubber-coated T-handle. The 18 volt motor offers increased power: up to 549 inch lbs. of torque. Its on-board Variospeed electronics allow infinite no-load speeds up to 1,450 rpm. The BSZ 18's quick charge battery is part of a new air-cooled charging system that cools both the battery and the charger during the charging process and offers 30-minute charging with up to 2,000 charges per battery. The tool utilizes three-level planetary gears and a smooth gear change mechanism to extend tool life. The built-in fan helps keep the motor cool under load. The Metabo BSZ 18 can drill up to 1/2" holes in mild steel and up to 1-3/16" holes in soft wood. The tool weighs 4.8 pounds with battery and comes with a built-in case that holds two bits.
BHA 18 (CORDLESS IMPACT DRILLS)
Up to 60% less vibrations: The vibration damping VibraTech handle improves comfort and safety at work, allows the more effective use of force and relieves joints noticeably, optimum control and firm grip: There is even a second holder on the right side of the machine for left-handers, the battery packs of the BHA 18 are available with Metabo AIR COOLED technology as NiCd or as lithium-ion (Li-Power) storage batteries. They can be used in all 18-Volt machines.
ASE 18 (CORDLESS PORTABLE LAMP / CORDLESS SAWS)
KSAP 18
Aluminium die cast gearbox housing for optimum heat dissipation and long life, electrical speed changeover, two-speed gear unit, suitable for drilling with drill bits with large diameter (e.g. form drills), for stirring thick liquid-like materials and for screwing in long screws with large diameter (e.g. in frame and facade pegs), breast plate and side handle for increased axial pressure, auto-stop carbon brushes to protect the motor.
USE 8 (SCREWDRIVER)
High torque, Compact, lightweight machine in pot design for permanent use, Ergonomic housing design for fatigue-proof operation, Patented quick bit change system, Two-piece depth stop, Depth stop can be fully removed for inspection during operation, Depth stop bush with aluminum front section, Precision adjustable screw depth, Forward and reverse running, Low-noise claw clutch, Variospeed (V) electronics for variable speed change, Removable scaffolding hook with built-in bit case.
BSZ 12 (CORDLESS DRILL / SCREWDRIVER)
"Rigid passage" for pulling in frame pegs, 10-way adjustable torque, Robust Metabo Marathon motor for extra long service life, Two-piece depth stop, Depth stop can be fully removed for inspection during operation, Depth stop bush with aluminum front section, Precision adjustable screw depth, Forward and reverse running, Tool change with quick clutch, Low-noise claw clutch, Sand-blasted fine quality cast claw clutch for long service life, Variospeed (V) electronics for variable speed change, Aluminum die cast gearbox housing for optimum heat dissipation and long life, Optimum machine cooling by axial/radial fan, Metabo coil guard to protect the motor from abrasive influences,
Auto-stop carbon brushes to protect the motor, Long additional handle for work with high torque.
W 8-1000
High-powered angle grinder with extra high cooling capacity for fast work progress even under the toughest operating conditions, sturdy, durable Metabo marathon motor, metabo dust protection technology for extremely long service life of unit: marathon motor with winding protection grid, fully enclosed switch, labyrinth seals on the ball bearing, ..., ergonomic housing design with distinctive indents for comfortably holding the device during clearing and roughing, as well as slip-proof holding of the unit, diecast aluminium gear unit housing: robust and resistant to wear, metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught., the tool-free adjustment and removal of the protective cover allows you to adjust the device for any application in seconds, metabo winding protection grid to protect the motor from abrasive effects, highly durable switch-off carbon brush with dust protection housing.
W 8-115 QUICK
High-powered angle grinder with extra high cooling capacity for fast work progress even under the toughest operating conditions, sturdy, durable Metabo marathon motor, Metabo dust protection technology for extremely long service life of unit: marathon motor with winding protection grid, fully enclosed switch, labyrinth seals on the ball bearing, ..., ergonomic housing design with distinctive indents for comfortably holding the device during clearing and roughing, as well as slip-proof holding of the unit, die-cast aluminum gear unit housing: robust and resistant to wear, Metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught., Metabo "Quick": quick tool change without using a key - quick, comfortable and safe, additional vibration damping Metabo VibraTech (MVT) handle for convenient continuous operation, the tool-free adjustment and removal of the protective cover allows you to adjust the device for any application in seconds, Metabo winding protection grid to protect the motor from abrasive effects, highly durable switch-off carbon brush with dust protection housing.
W 11-125 QUICK
High-powered angle grinder with extra high cooling capacity for fast work progress even under the toughest operating conditions, sturdy, durable Metabo marathon motor, Metabo dust protection technology for extremely long service life of unit: marathon motor with winding protection grid, fully enclosed switch, labyrinth seals on the ball bearing, ..., ergonomic housing design with distinctive indents for comfortably holding the device during clearing and roughing, as well as slip-proof holding of the unit, die-cast aluminum gear unit housing: robust and resistant to wear, Metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught.
W 11-150 QUICK
High-powered angle grinder with extra high cooling capacity for fast work progress even under the toughest operating conditions, sturdy, durable Metabo marathon motor, Metabo dust protection technology for extremely long service life of unit: marathon motor with winding protection grid, fully enclosed switch, labyrinth seals on the ball bearing, ..., ergonomic housing design with distinctive indents for comfortably holding the device during clearing and roughing, as well as slip-proof holding of the unit, die-cast aluminum gear unit housing: robust and resistant to wear, Metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught., Metabo "Quick": quick tool change without using a key - quick, comfortable and safe, additional vibration damping Metabo VibraTech (MVT) handle for convenient continuous operation.
WE 14-125 PLUS
Robust Metabo Marathon motor, Die cast aluminum gear housing, Metabo S-automatic torque limiting clutch, Spindle stop, Metabo "Quick" tool quick change, Adjustment of protective hood without tools, High torque, Vario Tacho Constamatic (VTC) full-wave electronics, Thumb-wheel for pre-selection of speed, Electronic soft start, Overload protection, Metabo winding protection grid, No-volt release switch, Auto-stop carbon brushes.
W 23-230
Robust Metabo Marathon motor, High efficiency and increased torque through optimum heat dissipation, Die cast aluminum gear housing, Starting current limitation, Spindle stop, Rotatable handle without tools, Protective hood adjustment without tools, Supporting strap adjustable according to application: left, right or up, Metabo safety switch: Lock against unintentional start, Metabo winding protection grid, Auto-stop carbon brushes, The best Metabo rough and abrasive grinding disc for any angular grinder application (accessory), Versatile applications through the extensive range of accessories.
W 23-180
Robust Metabo Marathon motor, High efficiency and increased torque through optimum heat dissipation, Die cast aluminum gear housing, Starting current limitation, Spindle stop, Metabo "Quick": Tool quick change, Rotatable handle without tools, Protective hood adjustment without tools, Supporting strap adjustable according to application: left, right or up, Metabo safety switch: Lock against unintentional start, Metabo winding protection grid, Auto-stop carbon brushes, The best Metabo rough and abrasive grinding disc for any angular grinder application (accessories), Versatile applications through the extensive range of accessories.
PE 12-175 (ANGLE POLISHER)
Hand guard cap on gear housing - best ergonomy for fatigue-free operation, Powerful 1200 Watt Marathon motor, thus better overload capacity, Extreme torque (14 Nm!), Spindle stop for easy tool change, VTC electronics for consistent work results, Die-cast aluminum gear housing: Robust and resistant to wear, Overload guard and restart guard.
SE 12-115
For tarnishing, glazing and polishing stainless steel, non-ferrous heavy metals and other materials, Precise machine guidance by supporting rollers, Spindle lock, Robust Metabo Marathon motor, Vario Tacho Constamatic (VTC) full-wave electronics, Thumb-wheel for speed pre-selection, Electronic soft start, Overload protection, Restart guard, Metabo coil guard, Auto-stop carbon brushes, Die cast aluminum gearbox housing.
FSX 200 INTEC (DISC SANDER)
Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel, Light and handy machine for comfortable one-handed operation. Ideal for overhead operation, very good weight-performance ratio, sealed dust-proof ball bearing for long service life of the machine, quick sheet change by velcro-faced backing pad, comfortable, vibration-damping, non-slip rubber coated handle, dust extraction unit with Intec filter system, multiple cleaning.
SX E 450 DUO
Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel, also suitable for louver sanding and for sanding varnished surfaces, The random orbit movement (rotation with oscillation) of the base plate gives an excellent finish coupled with potential for high stock removal, Variospeed (V) electronics for variable speed change, thumb-wheel for pre-selection of speed, No scratches while placing the running machine on the material owing to the built-in support plate brake (Power Control System). No more time-consuming finishing work due to scratches. Ideal for sanding very thin material (e.g. veneered surfaces) and sensitive areas, Unique "Duo" oscillating circuit setting; position 1: (small oscillating circuit 3 mm) up to 100% finer finish, position 2: (larger oscillating circuit 6 mm) up to 70% greater stock removal, support plate in professional format (Ø 150 mm) with longer service life owing to use of high grade burring material.
BA E 1075 (BELT SANDER)
Powerful and loadable motor with high reserve capacity, Fast and easy sanding belt change, Very good polished section by extremely precise belt path, Excellent sanding results and comfortable operation by favorable center of gravity position of the motor, Metabo S-automatic safety clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material, Variospeed (V) electronics for variable belt speed change, Thumb-wheel for pre-selection of belt speed, Auto-stop carbon brushes to protect the motor, Additional handle for ideal machine guidance; convertible for working overhead or for grinding in corners, Dust extraction unit: thus also suitable for dust-free grinding in closed spaces, External suction possible: a vacuum cleaner can be connected, Suitable for stationary use due to the supplied base.
FSR 200 INTEC (SANDER)
Universal use for sanding wood, plastics, metals, stone, gypsum and lacquered surfaces. Light and handy machine for comfortable one-hand operation. Ideal for operations overhead, Very good weight-performance ratio, thus ideal for working overhead, Vibration-damping, non-slip rubber coated handle, Dust-proof ball bearing, Grinding plate with Velcro and clamp fixture: grinding sheets can be used with or without Velcro, Dust extraction unit with Intec filter system, multiple cleaning.
SR 20-23 (SANDER)
Universal use for sanding wood, plastics, metals, stone, gypsum and lacquered surfaces, Robust sander with long service life even under tough conditions, Designed for continuous commercial use, Very good weight-performance ratio, thus ideal for working overhead, High sanding capacity with first-class surface quality, Even sanding pattern with high quality sanding plate made of micro-cellular polyurethane elastomer, Especially vibration-free by electrodynamic fine balancing, 4 high quality oscillating buffers and dust-protected quality ball bearing for long service life with continuous use, Solid aluminum die cast bearing flange guarantees higher service life, Sturdy aluminum die cast oscillating plate, Unique clamping system enables quick and comfortable change of sanding disc, Sanding possible up to the outermost corner, as the grinding plate has no projections, Dust extraction unit with Intec filter system, can be retrofitted as accessory, External suction possible: a vacuum cleaner can be connected, Auto-stop carbon brushes to protect the motor.
SR E 359 (SANDER)
Universal use for sanding wood, plastics, metals, stone, gypsum and lacquered surfaces, Powerful motor with high capacity reserve, Even sanding pattern with high quality sanding plate made of micro-cellular polyurethane elastomer, Especially vibration-free by electrodynamic fine balancing, 4 high quality oscillating buffers and dust-protected quality ball bearing for long service life with continuous use, Solid aluminum die cast bearing housing, Sturdy aluminum die cast oscillating plate, Quick-grip clamping device with rubber-coated pressure pad for optimum sanding sheet tension setting, Sanding possible up to the outermost corner, as the grinding plate has no projections, Variospeed (V) electronics for infinitely variable change of number of oscillations, Thumb-wheel for speed pre-selection, Dust extraction unit for dust-free operation without suction hose, Dust bag holder with dust retaining flap, External suction possible: a vacuum cleaner can be connected, Auto-stop carbon brushes to protect the motor.
GE 700
The multi-talented one: with extended grinding spindle (double ball bearing in solid steel tube); ideal for grinding and sharpening at difficult to reach places, Hardened and ground collect chuck for precise concentricity of tool, Spindle lock for easy tool change, Robust aluminum die cast bearing flange, Ergonomic shape for fatigue-free grinding, Vario-Constamatic (VC) full-wave electronics for variable speed change. Under load the speed remains almost constant, Thumb-wheel for speed pre-selection, Robust Metabo Marathon motor for extra long service life, Metabo coil guard to protect the motor from abrasive influences, Auto-stop carbon brushes to protect the motor, Suitable for actuating bending waves.
GE 900 PLUS
The specialist: handy grinder with especially high torque; ideal for grinding inner and outer surfaces in combination with flap wheels , Hardened and ground collect chuck for precise concentricity of tool, Spindle lock for easy tool change, Robust aluminum die cast bearing flange, Ergonomic shape for fatigue-free grinding, Vario-Constamatic (VC) full-wave electronics for variable speed change. Under load the speed remains almost constant, Thumb-wheel for speed pre-selection, Robust Metabo Marathon motor for extra long service life, Metabo coil guard to protect the motor from abrasive influences, Auto-stop carbon brushes to protect the motor.
OFE 738 (ROUTERS, MILLING & GRINDING MOTORS)
Sturdy 2-column guide, Robust plastic-covered aluminum die cast bearing flange, Hardened and ground replaceable collect chuck for precise concentricity of tools, Spindle lock for easy milling cutter change, Vario-Constamatic (VC) full-wave electronics for variable speed change. Under load the speed remains almost constant, Very suitable for milling heat-sensitive materials and plastics, Thumb-wheel for speed pre-selection, Turn the machine on and off without releasing the handle, Aluminum die cast base plate with coating for easy sliding and for careful treatment of workpiece surface, Ripping fence guided in prisms, Auto-stop carbon brushes to protect the motor, External suction possible: a vacuum cleaner can be connected, Can also be used in combination with the guide rail 6.31250, Bayonet fastening of motor section in milling adapter, Motor section suitable for actuating bending waves, Motor section for stationary use in milling-drilling stand 700.
OF E 1229 (ROUTERS, MILLING & GRINDING MOTORS)
Dial gauge for fine tuning the milling depth with 0.1. mm precision, Three-level stop to preselect up to 3 different milling depths, Sturdy 2-column guide, Robust plastic-covered aluminum die cast bearing flange, Hardened and ground replaceable collect chuck for precise concentricity of tools, Spindle lock for easy milling cutter change, Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load, Very suitable for milling heat-sensitive materials and plastics, Thumb-wheel for speed pre-selection, Overload protection by electronic monitoring of coil temperature. LED for impending overload, Turn the machine on and off without releasing the handle, Aluminum die cast base plate with coating for easy sliding and for careful treatment of workpiece surface, Ripping fence guided in prisms, Auto-stop carbon brushes to protect the motor, Precise ripping fence guided in prisms with fine adjustment, External suction possible: a vacuum cleaner can be connected.
OF E 1812 (ROUTERS, MILLING & GRINDING MOTORS)
Three-level stop to preselect up to 3 different milling depths, Sturdy 2-column guide, Robust plastic-covered aluminum die cast bearing flange, Hardened and ground replaceable collect chuck for precise concentricity of tools, Spindle lock for easy milling cutter change, Vario-Tacho-Constamatic (VTC) full-wave electronics for variable speed change. Speed automatically remains constant under load, Very suitable for milling heat-sensitive materials and plastics, Thumb-wheel for speed pre-selection, Turn the machine on and off without releasing the handle, Aluminum die cast base plate with coating for easy sliding and for careful treatment of workpiece surface, Ripping fence guided in prisms, Auto-stop carbon brushes to protect the motor, Precise ripping fence guided in prisms with fine adjustment, External suction possible: a vacuum cleaner can be connected.
HO 0882 (PAINT REMOVAR AND PLANNER)
Carbide-tipped planer blade. Thus, also suitable for planing edges of chip trays and joiner plates, Easy blade change using cassette system: no blade setting required; no withdrawal of blade required on tightening the clamping screws; no pressure marks as pressure pads are made of hardened steel, Variably adjustable planer depth and notch depth, Aluminum die cast and milled cut planer base, V-groove in front part of the planer base for easy chamfering, Chip ejection to left and right (convertible), External suction possible: a vacuum cleaner can be connected, Spring-mounted bow on the planer base for stopping the machine without damaging one of the planing blades or the workpiece.
OFE 738 (ROUTERS, MILLING & GRINDING MOTORS
Carbide-tipped planer blade. Thus, also suitable for planing edges of chip trays and joiner plates, Easy blade change using cassette system: no blade setting required; no withdrawal of blade required on tightening the clamping screws; no pressure marks as pressure pads are made of hardened steel, Variably adjustable planer depth and notch depth, Aluminum die cast and milled cut planer base, V-groove in front part of the planer base for easy chamfering, Chip ejection to left and right (convertible), External suction possible: a vacuum cleaner can be connected, Spring-mounted bow on the planer base for stopping the machine without damaging one of the planing blades or the workpiece.
STE 70 (Jig Saw)
Robust gear and motor design for hard applications, Easier and quicker saw blade change, Low saw blade supporting roller with guide notch - for especially exact cuts, Quick locking of the guide plate for bevel cuts with the angles of 15, 30 and 45°, Ideal handling by ergonomic design, Bow-type handle for comfortable one-hand operation of the machine, Blower for free view of cutting line, Upward movable grip-guard - for protecting the user from touching the saw blade accidentally, Vario-Constamatic (VC) full-wave electronics for variable change of number of strokes. On loading, the number of strokes remains almost constant, Thumb-wheel for pre-selection of number of strokes, Adjustable pendulum stroke for especially high cutting capacity and good curve negotiating feature, External suction possible: a vacuum cleaner can be connected, Auto-stop carbon brushes to protect the motor, Chip break guard in the guide plate for cut edges free of tears, Long cuts in a straight line with the guide rail 6.31250 and the guiding device 6.31249 available as accessory.
STE 80 (Jig Saw)
Robust gear and motor design for hard applications, Easier and quicker saw blade change, Metabo "Quick" saw blade change without tools, Low saw blade supporting roller with guide notch - for especially exact cuts, Quick locking of the guide plate for bevel cuts with the angles of 15, 30 and 45°, Ideal handling by ergonomic design, Bow-type handle for comfortable one-hand operation of the machine, Blower for free view of cutting line, Upward movable grip-guard - for protecting the user from touching the saw blade accidentally, Vario-Constamatic (VC) full-wave electronics for variable change of number of strokes. On loading, the number of strokes remains almost constant, Thumb-wheel for pre-selection of number of strokes, Adjustable pendulum stroke for especially high cutting capacity and good curve negotiating feature, External suction possible: a vacuum cleaner can be connected, Auto-stop carbon brushes to protect the motor, Chip break guard in the guide plate for cut edges free of tears, Long cuts in a straight line with the guide rail 6.31250 and the guiding device 6.31249 available as accessory.
STE 135 (Jig Saw)
Robust gear and motor design for hard applications, Powerful cutting in wood up to 135 mm thickness by optimized motor capacity, Metabo "Quick" saw blade change without tools, Low saw blade supporting roller with guide notch - for especially exact cuts, Quick locking of the guide plate for bevel cuts with the angles of 15, 30 and 45°, Ideal handling by ergonomic design, Especially comfortable handling with the slim motor housing and the additional knob, Blower for free view of cutting line, Upward movable grip-guard - for protecting the user from touching the saw blade accidentally, Vario-Constamatic (VC) full-wave electronics for variable change of number of strokes. On loading, the number of strokes remains almost constant, Thumb-wheel for pre-selection of number of strokes, Adjustable pendulum stroke for especially high cutting capacity and good curve negotiating feature.
STE 135 PLUS
Robust gear and motor design for hard applications, Powerful cutting in wood up to 135 mm thickness by optimized motor capacity, Metabo "Quick" saw blade change without tools, Low saw blade supporting roller with guide notch - for especially exact cuts, Quick locking of the guide plate for bevel cuts with the angles of 15, 30 and 45°, Ideal handling by ergonomic design, Rubber-coated bow-type handle for comfortable and non-slip one-hand operation, Blower for free view of cutting line, Upward movable grip-guard - for protecting the user from touching the saw blade accidentally, Vario-Constamatic (VC) full-wave electronics for variable change of number of strokes. On loading, the number of strokes remains almost constant, Thumb-wheel for pre-selection of number of strokes, Adjustable pendulum stroke for especially high cutting capacity and good curve negotiating feature.
PS E 0525 (ALL PURPOSE SAW / SABRE SAW)
For sawing wood, plastic, plasterboard, metals... Lock-on button, Aluminum die cast saw blade guide with plastic trays. Strong, durable and easy to hold, Axially adjustable stop for limiting the cutting length and for economical use of the entire cutting length of the saw blade, Vario-Constamatic (VC) full-wave electronics for variable change of number of strokes. On loading, the number of strokes remains almost constant, Thumb-wheel for pre-selection of number of strokes, 4-level pendulum blade movement, Auto-stop carbon brushes to protect the motor, Multipurpose use due to the large comprehensive range of saw blades. With the flexible saw blades, it can even saw in places that are difficult to reach.
PSE 1200 (SABRE SAW)
For sawing wood, plastics, metal pipes and profiles, Powerful, sturdy motor for powerful sawing; suitable for industrial use, Rubber coated die cast aluminum gearbox housing: strong, durable and comfortable to hold, Adjustable pendulum action for high cutting capacity, Variospeed (V) electronics for infinitely variable change of number of strokes, Electronic soft start, Rotatable handle without tools (4 positions), with non-slip rubber coating: the secure grip for any application, Saw blade can be rotated 180° for working comfortably overhead, Metabo "Quick" saw blade change without tools, Adjustable depth stop for limiting the cutting length (e.g. for sawing in front of a wall) without tools and for economical utilisation of the entire cutting length of the blade, Multipurpose use due to the large comprehensive range of saw blades. With the flexible saw blades, it can even saw in places that are difficult to reach.
KS 66 (CIRCULAR SAW)
Metabo S-automatic safety clutch: to limit sudden reverse torque which can occur if the bit jams or catches in the material, Easy saw blade replacement with saw blade lock, Sturdy aluminum die cast saw housing, Fully closed guide plate for secure support, Clearly visible cutting indicator, Cutting indicator can be set precisely, Safety lock switch to prevent unintentional start of the machine, Angle adjustment of the sawing blade to the guide plate can be aligned for maximum cutting precision, 4-point guide for angle-precise bevel cuts up to 45°, Lubrication system for long service life of the gearbox, Optimum sawing chip ejection. No loading of machine with sawdust, External suction possible: a vacuum cleaner can be connected, Suction nozzles rotatable and lockable, Auto-stop carbon brushes to protect the motor, With carbide thin circular saw blade.
KS 85 (CIRCULAR SAW)
Plunge cut possible without problem with automatic riving knife, Electronic motor monitoring: safety stop during overload (e.g. on blocking of sawing blade), Quick stop of sawing blade on shutting off the machine by mechanical safety brake, Easy saw blade replacement with saw blade lock, Sturdy magnesium die cast saw housing and guide plate for optimum weight-performance-ratio, Sawing close to wall possible, Double guided ripping fence, Clearly visible cutting indicator, Safety lock switch to prevent unintentional start of the machine, Angle-precise bevel cuts up to 60°, Lubrication system for long service life of the gearbox, Electronic soft start, Optimum sawing chip ejection. No loading of machine with sawdust.
KT 1441 (CHAINSAW)
Unique safety by patented Metabo wrap spring chain brake. In case of a kick-back or if the trigger button is released, the saw chain stops within 1/10 (!) of a second, Saw chain with safety driving links to avoid risk of kick-back, Sturdy motor with high capacity reserve, Break-proof housing made of reinforced fiber glass and heat-resistant polyamide, Large hand-guard In case of a kick-back, the hand guard is pressed forwards by the operator and thus the saw chain quick braking is released, Switch with lock to protect against unintentional start of the chain saw, Bracing with support star for low wear of saw chain, Automatic chain lubrication Adjustable oil delivery quantity View glass in machine housing to read oil level. Oil container with captive lock, Solid interchangeable stop clutch, Chain catch pin in case the chain breaks, Large surface for safe stop of chain saw after use, Easy chain change by the easy to access chain sprocket, Auto-stop carbon brushes to protect the motor, Combo-spanner in spanner case.
CS 14-15 (METAL CUTTING SAWS)
For single phase alternating current, Especially suitable for the fast, precise cutting of steel, non-ferrous metals, iron and cast profiles... Motor and gear with ball and needle bearing – designed for high loads, Sturdy construction with powerful motor, Spindle lock for easy disc change, Quick clamping device with variable mitre conversion up to 45°, Ideal and easy transportation by built-in handle, swiveling grinding disc protective cover, Spanner box.
MFE 30 (WALL CHASER)
Suitable for quick and clean cutting of wall chases, groove width adjustable, spindle lock, variable adjustable cutting depth, robust Metabo marathon motor, power-saving work by drawing cut from top to bottom. adjustable additional handle.
MFX 65 (WALL CHASER)
Suitable for quick and clean cutting of wall chases - even in concrete - to lay electric cables and pipes, Groove width adjustable with the help of the supplied distance rings, Spindle lock for easy assembly of tools, Variably adjustable cutting depth, Robust Metabo Marathon motor for extra long service life, Starting current limitation, Power-saving work by drawing cut from top to bottom, Roller under the motor housing for exact machine guiding, Rotatable handle without tools, Adjustable additional handle, Metabo safety switch: lock against unintentional start, With break tool for removing the chase, Also suitable for cutting using only one diamond cutting disc, Metabo coil guard to protect the motor from abrasive influences, Auto-stop carbon brushes to protect the motor, Suction nozzle for all common suction hoses.
KU 6870 (CURVE SHEAR)
For cutting through and trimming sheet steel without burrs, Precise cutting by high capacity die chuck with drop-forged, hardened and ground cutting bench, The blades need not be readjusted while working, Auto-stop carbon brushes to protect the motor Practical delivery bow.
KN 6875 (NIBBLER)
Unlimited curving capacity, ideal for notching sheets, For cutting sheets without burrs and deformations; even thin sheets are not deformed, Precisely adjustable direction of cutting: left, right and straight, and according to a template clamped onto the workpiece, Long service life of tools and high cutting capacity by carrier pin template guided concentrically to the template, Auto-stop carbon brushes to protect the motor, Practical delivery bow.
HE 2300 CONTROL (HOT AIR GUN)
For dust-free removal of all metal and wood lacquer coats, For drying fresh lacquer coats and fillers, For thawing frozen water pipes etc, For crimping cable ends, For repairing welding tents, boats and other similar applications, High service life due to easy-to-clean air filter, Powerful motor with optimum device cooling, Three blower levels, Variably adjustable, electronically controlled temperature regulation, LCD temperature indication of selected and actual temperature, Ideal handling by ergonomic design, Safe stationary application due to large non-slip floor space.
TA E 2019 (TACKER)
For staples, nails, Metabo shaped wood clutches (for fixing slot and spring boards) and groove clutches (for panels), Also suitable for handling flat wire clamps, Electronically variably modifiable impact force, Reshaping option (for clamps and nails), Tappet with nut for specific placing of tacker on the fixing wedge of the Metabo shaped wood clutches and groove clutches, Protection against unintentional triggering of blows.
KE 3000 (GLUE GUN)
For gluing: wood, plastic, carton, glass, ceramic, stone, textiles, cork, leather, metal.... on wood, plastics, concrete, stone, ceramic, metal etc, Also suitable for sealing and joining and for repairs with hot-melt type adhesive, Mechanical glue feed, Nozzle with heat guard, Hot-melt type adhesive temperature stabilization, Strap and supporting surface on housing for safe stop after use, Anti-drip nozzle. This prevents adhesive dripping .
KGS 303 PLUS (CROSSCUT AND MITRE SAW)
For all cutting tasks, ideal for interiors, For cutting: wood, coated panels and plastic , simple cutting of all angular, bevel and rafter cuts, powerful, maintenance-free universal motor, turntable with precise angular adjustment, die-cast aluminum work bench, suitable for right-handed and left-handed operators, cutting width increased to 300 mm, saw head can be tilted by up to 48° on both sides, multi-supported draw gear, high fence profiles that can be moved at the side, for the improved fixing of the workpiece, standard-equipped with a flange laser, integrated cut depth control, transport lock, extensive range of accessories.
KGS 301 (CROSSCUT AND MITRE SAW)
For all cutting tasks, ideal for interiors, For cutting: wood, coated panels and plastic, induction motor – soft and powerful, with electronic motor brake, stable design, mobile and sturdy, die-cast aluminum work bench, high precision and good working results ensured by the stable sawing head, saw head inclination from 0° to 45°, turntable adjustable by 45° on both sides, mounting bores for table assembly and positioning laser, extensive range of accessories.
TKHS 315 M-4.2 DNB (TABLE SAW)
Ideal for sawing beams, boards, plates and wood-like materials in the workshop and at construction sites, A chip and dust extractor unit or a wet-dry-vacuum cleaner can be connected to the standard chip and dust extractor unit, Smooth running angular guide, can also be used as sliding table, Sturdy parallel stop with eccentric clamp, Angular adjustment of saw blade continuously adjustable, Sturdy, powder-coated sheet steel design and galvanized table-top, Foldable table length extension, Frame and motor pre-mounted, For three phase current.
BKS 450-5.5 DNB (SITE CIRCULAR SAW)
Sturdy machine for professionals that can be used universally, Splash-proof, Exact parallel stop with eccentric clamp, Standard motor brake, Circuit breaker, Sawing table made of galvanized sheet steel, Large, sturdy and foldable table length extension, Sturdy, powder-coated frame sheet steel design, especially torsion-resistant, For three phase current.
BAS 317 PRECISION DNB (BAND SAW)
High precision and cutting output, two cutting speeds for various applications and materials, quick-release lever for quick saw blade change and easy conversion to belt grinder, door opening without tools; protection by safety limit switches, light saw blade guard stop via hand-wheel, blade clamp indicator with scale for easy reading of actual blade tension, precision three-pulley guide with HSS rollers and brass counter nuts; adjustable without tools, Parallel stop with long profile, clamped at the back and front. Can be used on both sides, with built-in magnifying glass, angular guide with soft handle and improved T-slot guide, for optimum grip while working, radius cutting with circular sawing attachment (accessory), GS dust-proof, large cutting height with height indicator, sturdy design due to steel sheet construction, comfortable and precise angle adjustment of sawing bench from -2° to 45° due to soft handle and patented toothed ring guide, suction adapter for all conventional Metabo suction hose diameters, large range of accessories for three phase current.
