BAND SAW SBW-3501B

TECHNICAL DATA :
Motor : 3/4HP (0.55 Kw)
Table Size (L x W) : 14" x 14" (356 x 356 mm)
Wheel Size : 14" (356 mm)
Cutting Height : 8" (200 mm)
Max. Cutting Width : 13 3/8" (339 mm)
Max. Cutting(Rip Fence) : 11 3/4" (300 mm)
Saw Blade Length : 100 3/4" (2562 mm)
Saw Blade Width : 1/8" to 3/4" (3 mm to 19 mm) (Standard 3/8")
Saw Blade Speed : 3100 SFPM (945 m/min)
Table Tilting : Left 10° / Right 45° 20° (CE)
Table Height from Ground : 42" (1066 mm)
Dust Chute Diameter : ø4" (100 mm) x 1
Machine Size (L x W x H) : 17-1/2" x 24" x 69" (445 x 610 x 1753 mm)

---

BAND SAW SBW-4300, SBW-4800 & SBW-5300

TECHNICAL DATA :
Model : SBW-4300 / SBW-4800 / SBW-5300
Motor : 2 HP (1.5 Kw) / 2 HP (1.5 Kw) / 2 HP, 3 HP (1.5 Kw, 2.25 Kw)
Wheel Size : 17" (430 mm) / 19" (480 mm) / 21" (530 mm)
Table Size : 17" x 17" (430 x 430 mm) / 19" x 19" (480 x 480 mm) / 21" x 21" (530 x 530 mm)
Cutting Height : 12" (300 mm) / 12" (300 mm) / 12" (300 mm)
Max. Cutting Width : 16 1/4" (410 mm) / 18 1/4" (462 mm) / 20 1/4" (514 mm)
Max. Cutting (Rip Fence) : 14 5/8" (370 mm) / 16 5/8" (422 mm) / 18 5/8" (474 mm)
Saw Blade Length : 131 1/2" (3340 mm) / 143" (3632 mm) / 152" (3861 mm)
Saw Blade Width : 3/8" to 1" (9.5 to 25.4 mm) (Standard 1/2") / 3/8" to 1" (9.5 to 25.4 mm) (Standard 3/4") / 1/8" to 1" (9.5 to 25.4 mm) (Standard 3/4")
Saw Blade Speed : (3300/1600 SFPM)(1000/490 M/min) / (3700/1700 SFPM)(1130/520 M/min) / (4000/1900 SFPM)(1220/580 M/min)
Table Tilting : Left 10° / Right 45° 20°(CE) / Left 10° / Right 45° 20°(CE) / Left 10° / Right 45° 20°(CE)
Table Height from Ground : 37 1/2" (950 mm) / 37 1/2" (950 mm) / 37 1/2" (950 mm)
Dust Chute Diameter : Ø4" (100 mm)x2 / Ø4" (100 mm)x2 / Ø4" (100 mm)x2
Machine Size : (L X W X H) 32" x 26" x 74" (820 x 670 x 1880 mm) / 36" x 30" x 78" (920 x 770 x 1990 mm) / 40" x 31" x 80" (1020 x 790 x 2040 mm)

---

BAND SAW SBW-5300H & SBW-6300H

TECHNICAL DATA :
Model : SBW-5300H / SBW-6300H
Motor : 3 HP / 5 HP, 3 HP (2.25 Kw / 3.75 Kw) / 5 HP, 3 HP (3.75 Kw)
Table Size (L x W x H) : 29.6" x 20.8" x 2" (750 x 530 x 50 mm) / 33 1/2 x 23 5/8 x 2" (850 x 600 x 50 mm)
Cast Iron Wheel Size : 21" (530 mm) / 25" (630 mm)
Cutting Height : 14" (350 mm) / 16" (400 mm)
Max. Cutting Width(without fence) : 20" (510 mm) / 24 1/2" (622 mm)
Max. Cutting Width (with fence) : 18 1/4" (465 mm) / 22 1/2" (570 mm)
Saw Blade Length : 165" (4190 mm) / 181" (4600 mm)
Saw Blade Width : 1/4" - 1 3/8" (6 - 35 mm) Standard 1"(Standard 25 mm) / 1/4" - 1 1/2" (6 - 38 mm) Standard 1"(Standard 25 mm)
Saw Blade Speed : 1370 M/min (4500 FPM) Single Speed (820 rpm) / 1615 M/min (5300 FPM) Single Speed (820 rpm)
Table Tilting : 45° (20° CE) / 45° (R) (20° CE)
Table Height : 35 1/2" (900 mm) / 33" (830 mm)
Dust Chute : 4" x 2 pcs (100 mm x 2 pcs) / 4" x 2 pcs (100 mm x 2 pcs)
Braking System : Foot Pedal + Micro Switch(Electronic Braking Switch System) / Foot Pedal + Micro Switch(Electronic Braking Switch System)
Blade Guide : Ball Bearing (European Roller Disk Type) / Ball Bearing (European Roller Disk Type)
Driving Belt : A type x 2 grooves / A type x 2 grooves
Cast Iron Fence : 1 1/4"(W) x 3 5/8"(H) (30(w) x 90(H)mm) / 1 1/4"(W) x 3 5/8"(H) (30(w) x 90(H)mm)
Sound Rating : 63-70 db / 63-70 db
Machine Size (L x W x H) : 39.4" x 28.3" x 78" (1002 x 727 x 1982 mm) / 47" x 29 1/2" x 81" (1190 x 750 x 2060 mm)

---

SE 65/5T

TECHNICAL DATA :
Center distance between each chuck. (mm) : 32
Max thickness of the panels (mm) : 80
Max boring depth (mm) : 70
Chucks rotation speed (rpm) : 2800
Chucks of the horizontal unit (n°) : 21
Chucks of the vertical units (n°) : 2x11 + 2x11
Min-max distance between vertical heads(mm) : 150-1100
Motors power. Kw(HP) : 1x 1,5(2) / 4x 1,1(1,5)

---

SE 21

TECHNICAL DATA :
Chucks (n.) : 21
Center distance between chucks (mm) : 32
Center distance between first and last chuck (mm) : 640
Max thickness of the panel (mm) : 80
Max drilling depth (mm) : 100
Working table size (mm) : 860x400
Max size of the piece to drill (mm) : 850x3000
Chuck revolution (rpm) : 2800
Motor power. Kw (HP) : 1,5 (2)

---

F 530

TECHNICAL DATA :
Working width (mm) : 530
Table length (mm) : 2850
In-feed table length (mm) : 1570
Out-feed table length (mm) : 1280
Tables height (mm) : 860
Cutter head diameter (mm) : 120
Cutter head speed (rpm) : 5000
Number of cutter head knifes : 4
Motor power (Hp) : 4

---

RS.53S

Technical Data:
Working width : 530 mm
Max. working weight : 300 mm
Min. working weight : 3 mm
Number of knives : 4
Dimension of knives : 530X35X3 mm
Cutter head speed : 4800 rpm
Feeding speed : 4/16 m/min
Motor power : 5,5 hp (4 kW)

---

PANEL SAW D405A

TECHNICAL DATA :
Sliding table dimension : 3,200 x 395 mm
Cast Iron table : 548 x 896 mm
Extension table (rear) : 952 x 896 mm
Extension table (front) : 830 x 320 mm
Table size : 1500 x 1726 mm
Round rail : Φ 50 mm
Main saw blade : Φ 400 (16")
Main saw bore : Φ 30 mm
Max. Cutting height at 90°(355 mm) : 105
Max. Cutting height at 45°(355 mm) : 70
Main motor power 7.5 HP (5.5 Kw) : 3PH
Main blade speed : 3,000/ 4,000/ 5,000 rpm
Scoring saw blade : Φ 120
Scoring saw blade bore : Φ 20 mm
Scoring blade motor power : 1 HP (0.75 kw)
Scoring blade speed : 8,000 rpm
Cuting width : 1,300 mm
Main saw blade tilting adjustment : Manual(0°~45°)
Main saw height adjustment : Motorized
Scoring saw adjustment : Motorized

---

COMPACT 5207

TECHNICAL DATA :
Weight of the saw : 910 Kg
Cutting depth : 60 mm
Saw motor rating : 3.9 Kw
Saw blade diameter : 250 mm
Saw blade bore : 30 mm
2 extraction connection : 100 mm
Wattage : 4.8 Kw

---

K 5-400

TECHNICAL DATA :
Planning working table sizes (mm) : 1850 x 410
Thicknessing working table sizes (mm) : 800 x 40
Saw and spindle moulder working table sizes (mm) : 1400 x 550
Diam. of the spindle with 3 knives (mm) : 30
Spindle rotation speed : 4260
Max. thicknessing working height (mm) : 225
Max depth of cut : 5
Diameter of the cutter block : 100
Number of cutters : 4
Feeding speed, m/min : 6/12
Motor power, Hp : 4

---

EDGE BANDER MAX330

TECHNICAL DATA :
PLC control, with separate controls for each unit. The frame is constructed from solid steel, making it both stable, and reliable : The MAX 330 can apply straight edges to panels with an automatic feed, and spreads glue directly onto wood or plastic edges in coils up to 3mm thick and strips up to 4 mm thick.
Automatic stand-by temperature : The electronic temperature control automatically switches to standby mode when not in use.
Glue Pot : The Teflon-coated glue pot has a capacity of 1.1 kgs, and includes 5 heating elements, as well as a glue temperature regulator, with automatic stand-by.
Trimming cut-off for front/rear edge express : The working cycle is controlled by PLC, with separate controls for each unit.
Dust device : The high•efficiency dust port allows dust to be collected directly under the table, for a clean work environment.
Flush with trimmers copying pads : Copying disc, numerical indicators for adjustments, combined TCT cutters beveled/radius
Overhead protection guard : The guard can be lifted, to allow for checking on small edge banding jobs.
Panel thickness ˚ (mm) : 12 •45 mm (numerical panel thickness indicator)
Edge thickness˚ (mm) : Min•Max 0.4•3.0 mm/up to 4.0 mm for strips
Feeding motor : 0.37 kw (automatic panel belt feeder). The large working table with 11 adjustable rollers is capable of supporting large panels. Includes an extensible support for large panels.
Glue & edge : 0.18 kw
Heating elements : 5 pcs with 1.2 kw
Heating In-feed fence : 0.32 kw (In cases where the panel. may be too wet due to poor weather conditions, this feature helps dry it, in order to achieve a good finish)
End trimming motor : 0.18 kw 80 mm (Automatic front/rear cut off trimming, and flush trimming and buffing on both sides of the work piece)
Flush trimming motor : 0.56 kw
Buffing Unit : 0.12 kw*2 - 120 mm - 3000 RPM (Cleans and polishes edges)
Cutter : Cutter-block with disposable cutters TCT beveled/radius 10,000 RPM. 75 mm radius 2 mm/15 ' bevel (optional)
Total power installed : 3.2 kw

---

EDGE BANDER MAX340

TECHNICAL DATA :
Feeding speed : 9M/min
Panel Thickness : 8-45 mm
Edge Thickness : 0.4 - 3 mm
Mini Panel Width : 100 mm
Mini Panel Length : 210 mm
Working Table Height : 850 mm
Extensible Support Width : 560 mm
Extractor Connector Ø in mm : Ø5"
Motor : 5.5 Kw
Overall Size : 3220 x 1485 x 1370 mm
Weight, kg (with standard equipment) : 510kgs/558kgs (N.W./G.W.)
Packing Size : 2290 x 720 x 1360 mm
Container Qty : (20'/40') 8 sets/ 16 sets
Up/Down : 12000rpm
Front/Rear : 12000rpm
Buffing : 3000rpm
POWER (KW)OF EACH MOTOR
Feeding Motor : 0.75 (Kw)
Glue Spindle Motor : 0.18 (Kw)
Front/Rear Trimming Motor : 0.22 (Kw)
Upper Trimming Motor : 0.37 (Kw)
Lower Trimming Motor : 0.37 (Kw)
Upper Buffing Motor : 3ph-0.12 (Kw); 1ph-0.18(Kw)
Lower Buffing Motor : 3ph-0.12 (Kw); 1ph-0.18(Kw)
Pre-heating : 0.4 (Kw)
Glue Pot Heating : 1.315 (Kw)

---

BS 940 BAND SAW

TECHNICAL DATA :
Flywheels diameter mm. : 940
Flywheel speeds r.p.m. : 550
Motor power HP (kW) : 7,5 (5,5)
Max. cutting height mm. : 560
Cutting width mm. : 910
Table sizes mm. : 820 x 1300
Blade length mm. min. : 6590 max. 6710
Overall dimensions mm.˚ (mm) : 1550 x 920 x 2900
Packing dimensions mm.˚ (mm) : 2990 x 670 x 1470
Net weight kg. : 700

---

TRC/N MORTISING MACHINE WITH FIXED TABLE

TECHNICAL DATA :
Longitudinal stroke of the head : 240 mm.
Transverse stroke of the head : 180 mm.
Vertical stroke of the head TRC/N fixed table : 160 mm.
Vertical stroke of the head TRC/N tilting table : 140 mm.
Vertical stroke of the head TRC/N turning table : 140 mm.
Working table sizes : 565 x 315 mm.
Westcott chuck : 0-20 mm.
Chuck rotation speed : 3000 r.p.m.
Motor power : 2 hp (1,5 kw)
Net weight : 260 kg.
Noise level according to DIN 45635/1600 : 66,9 db (a)
'CE' Standards

---

MC 60

TECHNICAL DATA :
Chain motor power : 3 HP
Motor R.P.M. : 2800 g./min
Motor shaft diameter : 16 mm
Vertical spindles motor power : 0.5 HP
Horizontal spindles motor power - 1 HP work table size : 600 x 110 mm
Overall dimensions : 1000 x 800 x 210
Weight : 500 kg

---

GAMMA/90

Clamping press for windows and doors. Corpus press semiautomatic and automatic. Hot and cold, single and multi-daylights for the production of panels overlaid with veneer, HPL, LPL, decorative papers. Embossing presses for bending massive wood. Membrane presses to glue on the shape panels PVC, PPL, veneer. Automatic pressing line for panels.

---

MOD. R/3 130

TECHNICAL DATA :
Maximum working thickness mm. : 70
Feeding speed mtpm : 20
Nr. 2 spreading roller diam. mm. : 185
Motorgear power Kw. : 0,37
Nr. 2 gluw dosing blades with micrometric adjustment
Safety screens with electric interlock

---

AM - 70 / N

TECHNICAL DATA :
Model : GM 104S / GM 104E
Min/max pitch of saws and belts teeth (mm) : 3 – 25 / 3 - 25
Max blade width (mm) : 50 / 50
Min/max diameter of the panel saw (mm) : 110-600 / 110-600
Grinding motor power. KW (HP) : 0,20 / 0,20
Motor power. KW (HP) : 0,20 / 0,20
Teeth sharpened per min. (n°) : 70 / 70
Grindstone diameter (mm) : 152 / 152

---

G 60 ROUTER WITH TILTING HEAD

TECHNICAL DATA :
Belt transmission
Pneumatic control
Chuck MK2 complete with 3 collets: 6-8-9,5
Self-braking motor
Working table sizes : 800 x 600 mm.
Chuck rotation speed : 9000-18000 r.p.m.
Motor power G 60 : 2/3 hp (1,5/2,2 kw)
Motor power G 80 - G 90 : 3/4 hp (2,2/3 kw)
Net weight G 60 : 290 kg.
Net weight G 80 : 360 kg.
Net weight G 90 : 410 kg.
'CE' standards

---

T.120

TECHNICAL DATA :
Table dimensions : 1100 x 800 mm
Max. profiling tool diameter : 250 mm
Max. tenoning tool diameter : 320 mm
Spindle speed : 3000/4500/6000/8000 rpm
Spindle motor power : 4 hp (3 kW)