CARMAN SCAN VG SYSTEM 128MB SD-RAM, 128MB CF CARD O/S
STORAGE HDD 40GB
DISPLAY 7"Color LCD, Touch screen, VGA out
SCAN DLC port
SCOPE 4 Channel Scope, Multi-mater, Analysis second ignition waceform
COMMUNICATION Host USB1.1, USB2.0, Client LAN, RS-232C
MULTI-MEDIA Speak out internal - Stereo
KEYPAD 4Direction key, 6Function Key (Bottom)
BATTERY Smart Li-ion battery, 1hour life
POWER SUPPLIER DC-in cigar power supplier (12V)
Features 1. 7 inch Color LCD with Touch Screen & VGA out
2. It contains 40G Hard disc inside.
3. Based on WINDOWS CE.NET
4. Equipped with LAN interface
5. Variety interface function with USB
TESTING INSTRUMENTS
CARMAN SCAN I The most sophisticated and Professional Auto Diagnostic Tool in the world.
DIMENSION 195 (W) x 255 (L) x 65 (D)mm
WEIGHT 1.2 Kgs(2.6Lbs) Mainbody
CASING Dark-gray High-strength ABS
LCD CCFL Backlight 320 x 240 Resolution(40 Columns x 12 Lines)
KEYPAD Soft-touch type(29Keys)
S/W CARD PCMCIA 16MB CARD
MEMORY EXPANSION S-RAM(1MB)
POWER SUPPLY 8~36 VDC Input
OSCILLOSCOPE 2Channel, 1M Sample/Sec,
RESISTOR 0~10
ACTUATOR DRIVING Max. 1.5A short to GROUND
SIMULATOR 8Bit D/A Converter, Output voltage range : 0 to 5V
RECHARGEABLE BATTERY 7EA/SET(1100mA) : 2Hours without back-lighting
POWER CONSUMPTION 3 Watts(Back light Off)
ANTI-SHOCK Rubber Shroud
TESTING INSTRUMENTS
GENISYS SYSTEM 2.0 System 2.0 is a new software application and a high speed compact flash card containing Power Features that will improve the performance of all Genisys scan tools.
POWER FEATURES: Fast Boot
- Approximately 10 seconds for the new Genisys.
- Approximately 15 seconds for the Genisys Classic (3454 and earlier).
New User Interface
- Provides Genisys with a new improved icon-based user interface. (Think MS DOS to Windows XP.) Code Reader Mode
- Allows user to read or clear codes fast. Now Genisys can boot into a code reader mode FAST
- Approximately 5 seconds! Personalization
- A custom setup mode for user preferences.
- User configurable Function Keys
- user selected applications at one button
- Interface Selection : New System 2.0 (icon based) or Genisys Classic
TESTING INSTRUMENTS
MTS 3100 The MTS 3100 gives you a gateway to measure and view automotive wave-forms on the same tool that you can use to read On-Board Diagnostics (OBD) serial data and trouble code.
The MTS 3100 is not limited to serial data diagnostics. using the built-in oscilloscope, you can measure automotive sensors actuators to accuratly pinpoint electrical failures.
In addition the MTS 3100 greatly improves your diagnostic efficiency by integreting the functional equivalent of a voltmeter, frequency meter, pulse width meter, and duty-cycle meter, all within the same hand-held diagnostic center.
HELP is always just one key press away. The MTS 3100' HELP feature provides information on the key available for each particular mode and a description of the function or mode that you are currently using. this should minimize time referring to the operator's manual.
TESTING INSTRUMENTS
MTS 5100 Features
- Vetronix Commitment to future growth.
- Primary ignition connection supports high voltage (600 volt) inputs.
- Ignition sync: single BNC input connection for ignition trigger service.
- Secondary Ignition: Large screw on secondary head attachment ensures a solid electrical connection.
- Power the unit with 12 volt power, AC/DC adapter or internal battery pack.
- DVOM: dvom connections up front allow easy lead attachment and use 3/4" spacing.
- Reduced Instruction Set Computing (RISC)-based Diagnostic Tool.
- Touchscreen technology.
- Universal Serial Bus Port.
- Local Area Network Port.
- Communication Ports: Provide 2 ways to connect the MTS5100 to other peripheral devices.
- Color Coded Connections.
HYDRAULIC BODY JACK
BDJ 10 P - Rated Load : 10T
- Stroke : 135 mm
- Min Height : 358 mm
- Net Weight : 32 kg
- Gross Weight : 33 kg
- Case : Plastic Blow Mould
- Packing Size : 950 x 400 x 190 mm
HYDRAULIC BODY JACK
BDJ 10S - Rated Load : 10T
- Stroke : 135 mm
- Min Height : 358 mm
- Net Weight : 31 kg
- Gross Weight : 32 kg
- Case : Steel Case
- Packing Size : 760 x 320 x 170 mm
HYDRAULIC BODY JACK
BDJ 20S - Rated Load : 20T
- Stroke : 145 mm
- Min Height : 385 mm
- Net Weight : 41 kg
- Gross Weight : 43 kg
- Case : Steel Case
- Packing Size : 760 x 330 x 260 mm
HYDRAULIC TIE BAR TOOL KIT
HBT KIT - Net Weight : 22 kg
- Gross Weight : 23 kg
- Packing Size : 520 x 490 x 100 mm
BODY PRY BARS SET OF 13 PIECES
BPB SET - Pieces : 13
- Net Weight : 9 kg
- Gross Weight : 10 kg
- Packing Size : 1010 x 210 x 260 mm
ENGINE STAND
ES 450 - Capacity : 450 kg(1000 lbs)
- Operating Height : 800 mm
- Net Weight : 20 kg
- Gross Weight : 22 kg
- Packing Size : 900 x 210 x 200 mm
ENGINE STAND
ES 680 - Capacity : 680 kg(1500 lbs)
- Operating Height : 820 mm
- Net Weight : 30 kg
- Gross Weight : 32 kg
- Packing Size : 860 x 280 x 210 mm
ENGINE STAND
ES 900 - Capacity : 900 kg(2000 lbs)
- Operating Height : 815 mm
- Net Weight : 34 kg
- Gross Weight : 38 kg
- Packing Size : 910 x 450 x 180 mm
HYDRAULIC TRANSMISSION JACK
XJ 500 SS - Rated Load : 0.5T
- Min Height : 1180 mm
- Max Height : 1980 mm
- Net Weight : 28 kg
- Gross Weight : 30 kg
- Overall Dim : 560 x 550 x 1180 mm
- Packing Size : 1120 x 225 x 280 mm
HYDRAULIC TRANSMISSION JACK
XJ 600 US - Rated Load : 0.6T
- Min Height : 870 mm
- Max Height : 1795 mm
- Net Weight : 59 kg
- Gross Weight : 68 kg
- Overall Dim : 780 x 680 x 960 mm
- Packing Size : 520 x 230 x 800 mm
HYDRAULIC TRANSMISSION JACK
XJ 1000 SS - Rated Load : 1T
- Min Height : 845 mm
- Max Height : 1770 mm
- Net Weight : 80 kg
- Gross Weight : 89 kg
- Overall Dim : 880 x 880 x 960 mm
- Packing Size : 550 x 370 x 1000 mm
LOW POSITION TRANSMISSION JACK
XJ 1500 LFUS - Min Height : 185 mm
- Max Height : 850 mm
- Net Weight : 75 kg
- Gross Weight : 83 kg
- Packing Size : 970 x 550 x 290 mm
HYDRAULIC QUAD(ATV) & MOWER LIFT
QML 680 - Capacity : 680 kg(1500 lbs)
- Min Height : 40 mm
- Min Width : 1055 mm
- Max Width : 1282 mm
- Length : 880 mm
- Net Weight : 37 kg
- Gross Weight : 39 kg
- Packing Size : 840 x 440 x 220 mm
VEHICLE POSITIONING JACK
VPG 680 - Capacity : 680 kg(1500 lbs)
- For Wheels Up To : 330 mm(13")wide
- Net Weight : 19 kg
- Gross Weight : 21 kg
- Packing Size : 700 x 650 x 210 mm
TRANSVERSE ENGINE SUPPORT
TES 500/1800 - Rated Load : 0.5T
- Length : 1800 mm
- Net Weight : 16 kg
- Gross Weight : 17 kg
- Packing Size : 1840 x 180 x 200 mm
HYDRAULIC SPRING COMPRESSOR
SC 1000 - Max Spring Load : 1000 kg(2200 lbs)
- Compressed Spring Diameter : 400 mm
- Compression Length : 210-570 mm
- Net Weight : 35 kg
- Gross Weight : 40 kg
- Packing Size : 1275 x 300 x 200 mm
HYDRAULIC RAM JACK
HR 8 - Capacity : 8T
- Min Height : 610 mm
- Max Height : 1090 mm
- Net Weight : 11 kg
- Gross Weight : 12 kg
MECHANICAL JACK 60"
MJ 60 - Min Height : 155 mm
- Max Height : 1350 mm
- Net Weight : 15 kg
- Gross Weight : 16 kg
- Packing Size : 1520 x 245 x 140 mm
HYDRAULIC PIPE BENDER
PB 3 - Rated Load : 12T
- Stroke : 315 mm
- Pipe Diameter : 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"
- Net Weight : 62 kg
- Gross Weight : 68 kg
- Packing Size : 770 x 350 x 240 mm
HYDRAULIC BOTTLE JACK
AIR HYDRAULIC JACK
AHJ 50 - Rated Load : 50T
- Min Height : 280 mm
- Max Height : 470 mm
- Net Weight : 33 kg
- Gross Weight : 35 kg
- Packing Size : 350 x 300 x 295 mm
AXLE STAND
HYDRAULIC TROLLEY JACK
TJ 3 - Rated Load : 3T
- Min Height : 130 mm
- Max Height : 640 mm
- Net Weight : 60 kg
- Gross Weight : 68 kg
- Packing Size : 1150 x 455 x 255 mm
HYDRAULIC TROLLEY JACK
TJ 5 - Rated Load : 5T
- Min Height : 160 mm
- Max Height : 580 mm
- Net Weight : 95 kg
- Gross Weight : 105 kg
- Packing Size : 1540 x 420 x 270 mm
HYDRAULIC TROLLEY JACK
TJ 8 - Rated Load : 8T
- Min Height : 160 mm
- Max Height : 580 mm
- Net Weight : 105 kg
- Gross Weight : 117 kg
- Packing Size : 1540 x 420 x 270 mm
HYDRAULIC TROLLEY JACK
TJ 10 - Rated Load : 10T
- Min Height : 180 mm
- Max Height : 580 mm
- Net Weight : 140 kg
- Gross Weight : 158 kg
- Packing Size : 1660 x 520 x 350 mm
HYDRAULIC TROLLEY JACK
TJ 15 - Rated Load : 15T
- Min Height : 180 mm
- Max Height : 580 mm
- Net Weight : 155 kg
- Gross Weight : 175 kg
- Packing Size : 1660 x 520 x 350 mm
HYDRAULIC TROLLEY JACK
TJ 20 - Rated Load : 20T
- Min Height : 180 mm
- Max Height : 580 mm
- Net Weight : 160 kg
- Gross Weight : 180 kg
- Packing Size : 1660 x 520 x 400 mm
HYDRAULIC GARAGE CRANE
GC 1000 - Rated Load : 1T
- Lifting Height : 2200 mm
- Net Weight : 65 kg
- Gross Weight : 68 kg
- Packing Size : 1360 x 315 x 160 mm
- 730 x 585 x 90 mm
HYDRAULIC GARAGE CRANE
GC 2000 - Rated Load : 2T
- Lifting Height : 2300 mm
- Net Weight : 88 kg
- Gross Weight : 90 kg
- Packing Size : 1640 x 315 x 160 mm
- 830 x 585 x 90 mm
HYDRAULIC GARAGE CRANE
GC 3000 - Rated Load : 3T
- Lifting Height : 2500 mm
- Net Weight : 115 kg
- Gross Weight : 120 kg
- Packing Size : 1350 x 830 x 120 mm
- 1450 x 330 x 220 mm
EXHAUST EXTRACTION EQUIPMENT
AS - Reel with mechanical movement and spring-actuated winding of the flexible hose.
EXHAUST EXTRACTION EQUIPMENT
ASV - Reel with mechanical movement and spring-actuated winding of the flexible hose.
EXHAUST EXTRACTION EQUIPMENT
ASC - Reel complete with accessories for sliding on CA aluminum duct.
EXHAUST EXTRACTION EQUIPMENT
AS-MP/MT - Reel With motorised movement and push button control or remote control.
EXHAUST EXTRACTION EQUIPMENT
ASV-MP/MT - Reel with motorised movement, push button or remote control and electric fan.
EXHAUST EXTRACTION EQUIPMENT
ASC-MP/MT - Reel with motorised movement, push button or remote control and sliding trolley for installation on an aluminum duct.
EXHAUST EXTRACTION EQUIPMENT
ATN - Reel with mechanical movement and spring-actuated winding of the flexible hose.
EXHAUST EXTRACTION EQUIPMENT
ATNV - Reel with mechanical movement and spring-actuated winding of the flexible hose and complete with fan.
EXHAUST EXTRACTION EQUIPMENT
ATNC - Reel complete with accessories for sliding on EC extruded.
EXHAUST EXTRACTION EQUIPMENT
BA - These intake are utilized as connection between the anti-crushing flexible hose installed on winders or on floor installations and the vehicle exhaust pipe. the wide range allow to choose the model with the more suitable characteristic for the specific application. the special versions allow to solve problems with special means.
EXHAUST EXTRACTION EQUIPMENT
BA - The rubber intake join the anti-crushing flexible hose in gas exhaust extraction system mainly in the car sector for a better adaptation to the new generation exhaust pipes integrated in the car body of different vehicles producers. the wide range in our catalogue covers all the market requirements including also the "REV" special testing installations where there's a sliding trolley with automatic release system for the intake.
EXHAUST EXTRACTION EQUIPMENT
EV - Simple aspiration centrifugal fan in painted sheet and galvanized reinforced impeller with forwardly blades suitable for low dusty air transport. The characteristics of low flow rate and low pressure allow a large utilization in our gas exhaust or welding fumes extraction systems that guarantee the best performances at low level noise.
EXHAUST EXTRACTION EQUIPMENT
VA - Simple aspiration centrifugal fan in die-cast aluminium and impellor with radial blades welded in high thickness steel suitable for the transport of even very dusty air. the characteristics of low flow rate and high pressure allow a large use in centralized gas exhaust extraction system in automotive sector thanks also to its resistance to high temperatures and no spark version.
Noise level: the level noise values have been measured in free field. In environments with low level noise, it is recommended to use silencers and /or sound-proof boxes.
EXHAUST EXTRACTION EQUIPMENT
RC - Simple aspiration centrifugal fan in painted sheet and galvanized impellor with forwardly curved blades welded in high thickness steel suitable for the transport of even very dusty air. The characteristics of high flow rate and medium/ high pressure beside a wide range of sizes are largely utilized in centralized aspiration installations The impeller geometry and construction allow the employ in different sectors: gas exhaust or welding fumes extraction system, very dusty fluids with temperature up to 80?C and more in special versions.
EXHAUST EXTRACTION EQUIPMENT
PFA - The gas exhaust extraction systems for vehicles are to be installed only when during the constructin of a new workshop, any building work and any floor have been not yet realized inthe working places.
This kind of installation is recommended when:
- the lay-out is definite and not subject to any change even in the future.
- the aspiration points are no more than 5 for each installation.
- not all the aspiration points work at the same time.
- the installation line is no longer than 40-50 meters including the expulsion outside of the gases.
- the floor traps are in places protected from continuous displacement of the vehicles.
RIM STRAIGHTNERS
Atek Konig 10" to 22.5" - Code No : 54 00-CE
- Working Pressure : 140 bar
- Net weight : 365 kg
- Hydraulic Motor : 0,55 kW / 0,75 hp
- Working Motor : 0,75 kW / 1,00 hp
- Control Panel : 24V DC
- 3 phase Electric Engine : 380V 50Hz
- Rotating Speed : 250 Rpm
MAGNETIC DRILLS
PICCOLO 32/50 - Core Drill:12-32 mm
- Cutting Depth:50 mm
- Twist Drill:1-13 mm DIN 338
- Countersinking:10-40 mm
- Capacity: 1100 Watts
- 1-speed gearbox: 450 rpm
- Arbor: 19mm Weldon Direct Arbor
- Coolant Supply: Integrated, automatic
- Motor: Adjustable in height
- Stroke: 129 mm,range 100-200 mm
- Magnet Foot: 70 x 160mm
- Type of Magnet: Rigid
MAGNETIC DRILLS
MINI 40/2 - Core Drill: ? 12.0 - 38.0 mm
- Twist Drill: ? 1.0 - 13.0 mm DIN 338
- Countersinking: ? 10.0 - 40.0 mm
- Input: 1.100 W
- 1-speed gearbox: 450 rpm
- Tool Holder: 19 mm Weldon shank
- Coolant Supply: internal, automatically
- Height Adjustable: 98 mm
- Stroke: 141 mm
- Magnet adhesion: 12.000 N
- Magnet Foot: 95 x 200 mm
- Magnet Foot Assembly: rigid
MAGNETIC DRILLS
JUNIOR 75/50 - Core Drill:12-75 mm
- Cutting Depth:50 mm
- Twist Drill:1-32 mm DIN 338
- Countersinking:10-50 mm
- Capacity: 1800 Watts
- 4-speed gearbox: 110/175/245/385 rpm
- Arbor: MT3
- Coolant Supply: Integrated, automatic
- Motor: Adjustable in height
- Stroke: 190 mm,range 226-286 mm
- Magnetic adhesion: 20000 N
- Magnet Foot: 80 x 230mm
- Type of Magnet: 30° adjustable to left/right 10mm back and forth
MAGNETIC DRILLS
ROTABEST 100 - Core Drill:? 12-100 mm
- Cutting Depth:100/110mm
- Twist Drill:? 3.0-16.0 mm with drill chuck
- Countersinking:? 32.0 with Morse Taper
- Input: 1800 Watts
- 4-speed gearbox: 400 rpm
- Tool Holder: MT3
- Stroke: 245 mm,range 295-400 mm
- Magnetic adhesion:20000 N
- Magnet Foot: 80 x 230mm 30° adj left/right, 10 mm back/forwards
TOOL HOLDERS
TURTLE 350 PEL - 2 pallets with elastics: one with elastics on one side and the other with elastics on both sides including a practical large pocket with closing flap
- 1 document wallet
- 3 small component boxes
- 2 handles with ergonomically designed grip and extreme load capacity
- 2 locks with keys
- large base area for tools, accessories and spare parts
TOOL HOLDERS
NEW MEGA WHEELS PEL - Document wallet
- 2 tool pallets with elastics
- Bottom area with adjustable dividers
- 2 small component boxes
TOOL HOLDERS
Top 04 and Top 06 - Top Work Line range of products is ideal both for professional and DIY use, they are exceptionally robust, practical and have a huge carrying capacity.
- Made from different materials: tear resistant fabric made of 600D polyester with resistance to chemical agents and low temperatures and matched with 3M refractive stripes.
- rubber reinforced base.
- padded adjustable shoulder straps for the backpacks and the easy carry handles with rubber grips for the bags, provide maximum comfort even when fully loaded.
- reinforced stitching.
- zip fasteners, easy to open but secure at the same time.
TOOL HOLDERS
EXPLORER CASES - The Explorer Cases are available in several different sizes with three standard colours. Special colours are available on request and it is possible to personalize the interiors into various configurations, The clean internal lines provide an ideal case and foam allows the user to tailor the inserts to their own individual requirement.
HOISTS
ELECTRIC CHAIN HOIST - Pendant control voltage transformed into 24/48V to eliminate possible accident caused by circuit short and assure safe operation in wet environments.
- Automatic motor brake system features simultaneous braking upon power failure or switching off.
- Dual brake system assures safe operation.
- Limit switches hold load chain from running out.
- Advanced phase error relay keeps motor motionless at incorrect power connection.
- Optional emergency stop features available.
- Optional electronic overload protection available.
HOISTS
LEVER HOIST - The BLACK BEAR Lever Hoist is a very efficient and useful all purpose handling tool. Designed for lifting, pulling and holding at all angles and positions.
With capacities ranging from: 0.25ton to 9ton safe working load, the hoist is versatile and dependable for general use in an industrial environment. It may be used for fastening or securing heavy loads for transportation, stretching or holding steel frames in the fabrication and construction industries. lifting pulling and holding in the oil, gas and shipping industries, machinery moving. in the public utility and civil engineering sectors and many other applications.
HOISTS
HAND CHAIN BLOCK - Comprehensive range of manual chain hoists: 0.5 ton - 10 ton, with standard lifting capacities of 3 meters.
- Suspension and load hook both hot forged, heat treated and fitted with a swivel and safety latch.
- Grade 80 alloy load chain confirms to "ISO" and "DIN" standards.
- Both gear and hand chain wheel are covered by steel formed cases, ideally shaped and designed to withstand most external shocks.
- Double cover protection to protect internal parts form moisture and dirt.
- Equipped with a long life brake mechanism, that is instantly engaged once operation is stopped.
- Load chain guide and stripper assure proper fitting of load chain to load sheave.
PALLET TRUCKS
HU ROFI 25 T - Model Designation HU PROFI 25 T
- Capacity/Load (kg) 2500
- Tare weight (kg) 73
- Steering wheels (material) PUR or VG
- Size of steering wheels (mm) 200 X 50
- Load rollers (material) PUR or PA
- Size of load rollers (mm) 80 X 63
- Max Fork height (mm) 120
- Fork head lowered (mm) 80
- height of control handle (mm) 1230
- Overall length (mm) 1525
- Overall width/outer fork distance (mm) 520
- Fork dimensions (mm) 51 X 150 X 1150
TESTING INSTRUMENTS
Power Finder Circuit Seeker Circuit Tracer - Traces concealed wiring, locates junction boxes, and finds breakers for live or dead circuits-no need for power interruption.
- Finds breaks in wires and shorts to ground.
- Incorporates auto gain circuitry for enhanced accuracy.
- Locates and identifies blown fuses.
- Supports transmitter-to-receiver distances up to 4 miles (6.5 km) for closed circuit tracing.
- Accessories included: Adapter lead, (2) 9V batteries, AC blades, instruction video, extension leads, carrying case, earphone/tube.
TESTING INSTRUMENTS
PHASE SEQUENCE INDICATOR Live Phase Indicators Three neon lamps Motor rotation Indicators Two neon lamps Measurement Category Cat III, 600V per UL 3111-1
- Identifies L1, L2, L3 phases and indicates rotation of the motor before installation. •Clockwise and counterclockwise indication via neon lamps
TESTING INSTRUMENTS
PUNCHDOWN TOOL WITH 110 BLADE FOR USE IN TERMINATION - Inserts wire for a corrosion-resistant termination and trims off excess wire.
- Terminates 66, 110, BIX and Krone cross-connect and wall jacks.
- Spring-loaded for fast, low effort wire seating and termination.
- Internal impact mechanism eliminates jamming for longer, trouble-free service life.
- Adjustable low- and high- impact force settings.
- Bayonet-style blade locking mechanism.
- Neoprene pad for shock absorption.
- Spare blade storage in the handle.
- Color-coded yellow on the cut side of tool
CLAMP METER
CLAMP METER Amperage Measurement: AC - 200.0, 600A Voltage Measurement: 400.0, 600V Resistance: 400.0O Frequency: 0.400kHz Display: 4000 count LCD display Jaw Opening: 1.34" (34 mm) Measurement Category: Cat III, 600V
AC amperage, AC/DC voltage, frequency and resistance measuring capability.
- Easy to read back-lit display for use in low light conditions.
- Peak and data hold to capture measurement.
- MIN/MAX feature for added versatility.
- Analog bar graph to view quick changes.
- Selectable Auto Off for longer battery life.
- Accessories included: (2) 1.5 V AA batteries, test leads, carrying case
CLAMP METER
CM-950 AC/DC TRUE RMS CLAMP METER Amperage Measurement: AC - 200.0, 600A Voltage Measurement: 400.0, 600V Resistance: 400.0O Frequency: 0.400kHz Display: 4000 count LCD display Jaw Opening: 1.34" (34 mm) Measurement Category: Cat III, 600V
AC amperage, AC/DC voltage, frequency and resistance measuring capability.
- Easy to read back-lit display for use in low light conditions.
- Peak and data hold to capture measurement.
- MIN/MAX feature for added versatility.
- Analog bar graph to view quick changes.
- Selectable Auto Off for longer battery life.
- Accessories included: (2) 1.5 V AA batteries, test leads, carrying case
CLAMP METER
ELECTRICAL TESTER, 200A Compact amperage and voltage measurement.
- 200A AC, 600V AC/DC measurement.
- Resistance measurement up to 2000? with continuity beeper.
- Data hold to capture important readings.
- Auto off for longer battery life.
- Built-in, can't-get-lost test leads.
- Mini-claw jaw design for accurate amp measurement.
- Bright, easy-to-read, 2000-count LCD display.
- Accessories included: (1) 9V battery, carrying case.
DIGITAL MULTIMETERS
DM-200 - Auto ranging for convenient operation, non-contact voltage detection, and to save you time.
- Data hold to capture measurements.
- Auto power off and low battery indicator.
- RS-232 capable, may be connected to a PC for extended measurement capability with optional optically isolated interface DMSC-2.
- DM-210 also features:
- Relative offset display mode to see relative changes in measurements.
- Frequency, temperature, and capacitance measurements.
- AC duty cycle.
- Accessories included: (2) 1.5V AAA batteries, test leads, bead temperature probe (DM-210 only, 400?F/204?C max
TEST SET WITH TWO-WAY HANDS FREE
Waterproof tested to an IEC IP67 rating, these test sets are so impervious to water they can actually withstand submersion.
- The PE950 and PE961 feature our DigAlert over-voltage alarm and lock-out function to eliminate the danger of damaging or knocking out digital service lines.
- The new PE961 provides full ADSL compatibility.
- Ten-number speed dial memory (32 digits each).
- Last number redial.
- Precise hook flash.
- Microphone mute.
- Audible and visual mode indicators.
- Polarity test in any m
METAL SAWING MACHINE
KS 190 KA Mechanical hacksaw machine with plate guide of saw frame and dust-proof enclosed gearing (with AC Motor 3 phase) Accelerated return stroke of saw frame, 2 cutting speeds, Cooling arrangement and enclosed box foundation, Cutting range 190 mm diameter. Saw blade length 400 mm
- Round : 190
- Rectangle : 190 X 160
- Round : 140
- Rectangle : 140 X 140
METAL SAWING MACHINE
KS 400 HY Hydraulic hacksaw machine with pre-tensioned plate guides of saw frame and dust-proof enclosed gearing, accelerated return stroke of saw frame, V-belt drive, cooling, enclosed oil-hydraulic unit and enclosed box-type foundation, Cutting range 400 mm dia. 3 Cutting speeds with V-belt pulley, Saw blade length 650 mm
METAL SAWING MACHINE
KS 251 HY Hydraulic hacksaw machine with pre-tensioned plate guide of saw frame and dust-proof enclosed gearing, accelerated return stroke of saw frame, V-belt drive, cooling, enclosed oil-hydraulic unit and enclosed box-type foundation,Cutting range 250 mm dia.2 Cutting speeds with pole-reversible motor,Saw blade length 450 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 40 - 1Hp / 380V / 50Hz / 3Ph
- MT3 Spindle
- Working Capacity :
In Mild Steel
Drilling : 32mm
Face Mill : 100mm
End Mill : 20mm
In Light Alloy : 32mm
- Working Table : 730 x 210 mm
- Longitudinal Travel : 415 mm
- Cross Travel : 230 mm
- L x W x H : 800 x 737 x 1143 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 40HC - 1Hp / 380V / 50Hz / 3Ph
- MT3 Spindle
- Working Capacity :
In Mild Steel
Drilling : 32mm
Face Mill : 100mm
End Mill : 20mm
In Light Alloy : 32mm
- Working Table : 585 x 190 mm
- Longitudinal Travel : 340 mm
- Cross Travel : 180 mm
- L x W x H : 839 x 737 x 1817 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 31 - 1-1/2Hp / 380V / 50Hz / 3Ph
- MT3 Spindle
- Working Capacity :
In Mild Steel
Drilling : 32mm
Face Mill : 76mm
End Mill : 20mm
In Light Alloy : 32mm
- Working Table : 730 x 210 mm
- Longitudinal Travel : 430 mm
- Cross Travel : 185 mm
- L x W x H : 800 x 737 x 1143 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 400HC - 1-1/2Hp / 380V / 50Hz / 3Ph
- MT3 Spindle
- Working Capacity :
In Mild Steel
Drilling : 32mm
Face Mill : 76mm
End Mill : 20mm
In Light Alloy : 32mm
- Working Table : 585 x 190 mm
- Longitudinal Travel : 340 mm
- Cross Travel : 180 mm
- L x W x H : 737 x 839 x 1854 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 19 - 1Hp / 380V / 50Hz / 3Ph
- MT3 Spindle
- Working Capacity :
In Mild Steel
Drilling : 28mm
- Working Table : 420 x 470 mm
- Quill Diameter : 62 mm
- L x W x H : 965 x 750 x 1855 mm
MILLING, DRILLING AND CUTTING MACHINES
RF - 1018V - Variable Speed Metal Cutting Band saw Machine
- 1Hp / 380V / 50Hz / 3Ph
- Blade Size : 27 x 0.9 x 3280 mm
- Cutting Capacity : 0°
Circular : 254 mm
Rectangular : 127 x 457 mm 45°
Circular : 150 mm
- L x W x H : 1680 x 560 x 1330 mm
MILLING, DRILLING AND CUTTING MACHINES
JFC - 46SF - 1-1/2Hp / 380V / 50Hz / 3Ph
- MT4 Spindle
- Working Capacity :
In Mild Steel
Drilling : 40mm
Face Mill : 100mm
End Mill : 25mm
In Light Alloy : 50mm
- Working Table : 555 x 495 mm
- Column Diameter : 115 mm
- L x W x H : 914 x 762 x 2083 mm
